FAQ: How To Remove Metal Insert From Tent Pole?

How do you remove a ferrule from a tent pole?

Jam the pole in a vice and heat the tip of the ferrule with a heat gun, grasping the ferrule as it is heat with pliers turn it to see if it starts to move. Care must be taken not to over heat as you will burn the pole.

Can I cut a fiberglass tent pole?

When cutting the section to length, always cut towards the centre to avoid splintering the edge when you cut through. Cut part way through the pole, then turn it and cut part way. Repeat until you cut right through. Once you’ve cut all the replacement sections for one pole, fit them before moving on to the next pole.

Can you replace a tent pole?

The easiest and quickest way to fix a broken pole is with a pole repair sleeve. Also called a splint, this short tube is often provided with your tent. If not, buy one and pack it with you. A good pole repair sleeve is just slightly larger in diameter than your pole so that it doesn’t move around too much.

How long should shock cord be in tent pole?

What you’ll need: Shock Cord (1/8″ or smaller). You need at least the length of all your poles combined. My poles were 152″ each, I bought 30′ (or 360″ of cord).

You might be interested:  Quick Answer: How To Remove Metal Scratches From Appliance?

Do you need shock cord in tent poles?

However, as your tent poles are designed to be connected, it might make pitching your tent quite a challenge. It’s also much easier to lose components of your tent and poles when they aren’t attached together, so shock cords are very useful in this regard.

How do you unbend a metal pole?

The only way to soften the aluminum is to anneal it, which involves heating the aluminum almost to it’s melting point and then letting it cool slowly, but if you try to do that then your pole will be so soft that it won’t flex, it’ll just bend like welding wire.

What can I do with aluminum poles?

Aluminum poles are corrosion-resistant, so their finish lasts longer than steel poles. That means they cost less to maintain. Since they’re made of a lighter material, they’re also easier to unload at the job site. And when aluminum poles have reached the end of their service life, they can be recycled.

Are outbound tents waterproof?

This tent is also well equipped to be weather-resistant. There is a heavy duty 600 mm coated rain fly and front canopy to provide water and weather protection, as well as welded leak proof seams and polyester bathtub floor built-in to keep water out.

Leave a Reply

Your email address will not be published. Required fields are marked *