FAQ: How To Remove The Back From A Metal Wrist Watch?

What tool is used to take the back off a watch?

The case back knife is easily used by placing the blade under the case and prying it off. Lastly, with the help of the screwdriver, you can easily replace the battery, in case you have a quartz watch.

How do you open the back of a watch at home?

In this case, simply flip the watch over, grip it in one hand by the watch strap, and hold the friction ball against the case back with your other hand. Apply some pressure and rotate the ball counter-clockwise – if the case back is loose enough, it should unscrew fairly easily.

How do you open the back of a stubborn watch?

Pour a little acetone (nail varnish remover) into the socket and leave it for a minute or so. Empty out the excess acetone back into the cap of the bottle, attach the socket back on the wrench and give the case back a tap with a rubber mallet or something that will give it a bit of force but not mark it. Job done.

How do you open the back of a Rolex watch?

Hold the watch firmly, turn the ball to the left until it starts to unscrew. Keep going until you can grip the back of the watch with your fingers and turn it some more. Pull the back off.

You might be interested:  Often asked: How To Remove Metal Twist Off Champagne Caps?

How do I take the back off my Seiko watch?

Look for a small lip or indentation on the edge of the back. You can find the lip up or around where the watch band is. Use either a dull knife (emphasis on dull) or a screwdriver. Put the flat end of your tool inside the lip and try to pry it off.

Leave a Reply

Your email address will not be published. Required fields are marked *