Often asked: How To Remove The Glass From A Samsung Twin & Metal Shelf?

How do you remove glass from refrigerator shelves?

Remove items from the shelf and remove the crisper drawers. Push up on the rear of the glass from underneath. While holding up the rear of the glass, push the glass to the rear about 1/2″ to disengage it from the front of the frame. Once disengaged from the front of the frame, carefully lift the shelf up and out.

How do you remove the drawer on a Samsung FlexZone?

To remove the FlexZone basket, first fully open the FlexZone drawer. Lift the FlexZone basket up and pull it out with both hands. To reinsert the FlexZone basket, fully open the FlexZone drawer. Next, lower the basket (back-first) into the rail assembly, and then lower the front of the basket into place.

How do you clean glass shelves?

Clean glass shelving by removing the items on the shelf and using a fine woven microfiber cloth designed specifically for glass. Make sure the cloth is damp, not wet. After wiping the cloth over the glass shelf, finish with a dry microfiber cloth which will make the glass look perfect.

How do you clean a Samsung Ice Maker?

Here’s how to wash your ice maker quickly and easily:

  1. Remove and wash the ice bin in warm, soapy water.
  2. Use the same bleach solution on a damp cloth to wipe down the ice maker itself.
  3. Wipe away the bleach solution with a cloth dampened in just water.
  4. Make sure both the ice maker and ice bin are completely dry.
You might be interested:  Quick Answer: What Can You Use To Remove Paint From Metal?

Where is the drip tray on a Samsung refrigerator?

A refrigerator drip tray is located on the underside of the device near the floor. It is usually available by removing the grill on the front of the refrigerator and sliding the pan forward.

What is a FlexZone drawer?

The Flex Zone is a full-width drawer with an adjustable temperature control. You can use the Flex Zone for large party trays, deli items, wines, pizzas, beverages, or miscellaneous items. There is a temperature sensor which lets you adjust the amount of cold air allowed into the Zone.

Leave a Reply

Your email address will not be published. Required fields are marked *