How do you get a metal pole out of the ground?
Common Pole Removal Tools and Methods A generic piece of equipment like a car jack with significant leverage is usually the go-to option besides a post puller but lacks grip and control. You can lift poles out of the ground by placing the jack underneath the pole.
How do you remove a metal fence post from a concrete slab?
Start by using your shovel to dig around the steel fence posts and the concrete. This will make it easier for you to remove them later. Dig all the way down to the bottom of the concrete. Wear gloves for digging and then try moving the steel fence posts backward and forward to loosen them a little.
Can you reuse metal fence posts?
Whether the fence is over your property line, or maybe the fence was installed badly, you can actually pull chain link fence posts and reuse them. Just be sure to avoid damaging the posts if you try to remove the concrete anchor that holds them in place.
How do you straighten a fence post without removing it?
The Fix-A-Fence Solution
- Step 1 – Prepare the Site.
- Step 2 – Prepare the Fix-a-Fence Kit.
- Step 3 – Position the Bracket in the Hole.
- Step 4 – Mix a 60lb Bag of Concrete.
- Step 5 – Fill the Hole with Concrete.
- Step 6 – Take a Break While the Concrete Cures.
- Step 7 – Reposition the Fence Post and Attach the Bracket.
How do you break rocks in a post hole?
Options in rocks include digging holes with a backhoe or chipping away the rock, if it’s a formation that will chip and break; prying rocks out with a hand bar; or using a hammer drill.
How do you remove metal from concrete?
If this doesn’t work, your only recourse short of breaking up the pad is to cut the posts flush with an angle grinder or reciprocating saw that has a metal-cutting blade attached. You may be able to hide the cut posts by grinding the ends to get them below the concrete surface and covering each one with concrete patch.